Wirtgen Slipform Paver SP 64i:
High load-bearing capacity for the container terminal Valencia / Spain
The areas of port facilities are exposed to some of the heaviest loads anywhere. Stacks of containers, heavy goods traffic, cranes and forklift trucks all bring their weight to bear on the sub-base. It’s little wonder, then, that the Port of Valencia on the Mediterranean elected to use concrete for the expansion of its container terminal: it is more rigid, and hence has a greater load-bearing capacity than asphalt. The task of paving concrete on the new area, some 90,000 m² in size, was entrusted to a new Wirtgen SP 64i slipform paver.
Paving quality up, fuel consumption down
Given the tight timescale of just one month, the most important demands on the machine technology were reliability and productivity. The paver surpassed expectations: “With the SP 64i we were not only able to build the 5m-wide and 32 cm-thick concrete surface precisely and reliably,” reports Site Manager Isidro Cabezuela Moreno of the building contracting company, UTE Dragados-Pavasal. After all, the completion of 1,500 m² of area per work shift was, he revealed, much higher than with comparable machine models. “We were also able to reduce our fuel consumption by some 30 %.” This was thanks to the load-dependent “ECO mode” engine control system, which sustainably lowers consumption despite the 40 % higher engine output compared with the predecessor model, the SP 500. The SP 64i ultimately passed its baptism of fire with flying colors: “The quality of the concrete pavement is absolutely first rate,” says Moreno.
Resilience for areas carrying heavy loads
Up to four shipping containers are stacked on top of each other in the container terminal at the Port of Valencia. Depending on the container version- there are 20, 40 and 45 ft versions – the weight can amount to between 96 and 120 t – an immense concentrated load on the areas supporting the containers. Concrete is the material of choice for surfaces bearing heavy loads. And the SP 64i slipform paver is the machine that sets the standards.
Job site details:
- Total surface area: 89.737 m²
- Layer thickness: 32 cm
- Pave width: 5 – 5,25 m
- Paved material quantity: 29.000 m³ of concrete (approx.)
- Area paved: 1.500 m² per work shift (approx.)
Phone +49 2645 131 128